Connectors
-
P/N: SCON-5D-NM
- N Male screw connector for 5D-FB cable
- No special tool required for installation
- Compatible with LMR300, RG-59, RG-6U, RG-8X
- 50 ohm
- Up to 11 GHz
In Stock3.50 € -
P/N: SCON-8D-NM
- N Male screw connector for 8D-FB cable
- No special tool required for installation
- Compatible with Ø 11.00 mm cables with the core Ø 2.6 - 2.8 mm
- 50 ohm
- Up to 11 GHz
In Stock3.90 € -
P/N: SCON-10D-NM
- N Male screw connector for 10D-FB cable
- No special tool required for installation
- Compatible with Ø 13.00 mm cables with the core Ø 3.5 mm
- 50 ohm
- Up to 11 GHz
In Stock3.90 € -
P/N: CON-5D-NM
- N Male crimp connector for 5D-FB cable
- Also compatible with LMR300, RG-59, RG-6U, RG-8X and other cables with an outer jacket diameter of 7.5 mm and a dielectric diameter of 5 mm
- Crimping pliers and soldering tool are necessary for the installation
In Stock1.90 € -
P/N: CON-5D-NF
- N Female crimp connector for 5D-FB cable
- Also compatible with LMR300, RG-59, RG-6U, RG-8X and other cables with an outer jacket diameter of 7.5 mm and a dielectric diameter of 5 mm
- Crimping pliers and soldering tool are necessary for the installation
In Stock1.90 € -
P/N: CON-8D-NM
- N Male crimp connector for 8D-FB cable
- Compatible with other cables with an outer jacket diameter of 11 mm and a dielectric diameter of 7.5 mm
- Crimping pliers and soldering tool are necessary for the installation
In Stock1.90 € -
P/N: CON-8D-NF
- N Female crimp connector for 8D-FB cable
- Compatible with other cables with an outer jacket diameter of 11 mm and a dielectric diameter of 7.5 mm
- Crimping pliers and soldering tool are necessary for the installation
In Stock1.90 € -
P/N: CON-8D-SM
- SMA Male crimp connector for 8D-FB cable
- Compatible with other cables with an outer jacket diameter of 11 mm and a dielectric diameter of 7.5 mm
- Crimping pliers and soldering tool are necessary for the installation
In Stock1.90 € -
P/N: CON-5D-SM
- SMA Male crimp connector for 5D-FB cable
- Compatible with LMR300, RG-59, RG-6U, RG-8X and other cables with an outer jacket diameter of 7.5 mm and a dielectric diameter of 5 mm
- Crimping pliers and soldering tool are necessary for the installation
In Stock1.90 € -
P/N: CON-5D-SF
- SMA Female crimp connector for 5D-FB cable
- Compatible with LMR300, RG-59, RG-6U, RG-8X and other cables with an outer jacket diameter of 7.5 mm and a dielectric diameter of 5 mm
- Crimping pliers and soldering tool are necessary for the installation
In Stock1.90 €
N-Type connectors
N-Type connectors - microwave connectors with an operating frequency range of up to 10-11 GHz. This connector type was developed in the early 1940s by Bell Laboratories (USA) and named "N" after the first letter of the author's last name - Paul Neill.
These were the first threaded connectors that met the reliability requirements of microwave links for medium power transmission and had high consistency in impedance, VSWR, and losses.
Today, N connectors (along with SMA) are the most commonly used RF connectors. The best connectors of this type have housings (with 0.625" threads) made of stainless steel and beryllium bronze or brass plated with gold, nickel, silver, or alloys called "white bronze."
The inner conductor is made of hardened beryllium. The dielectric of the coaxial cable is made of fluoroplastic and has a VSWR (min = 1.05) in the frequency range up to 10-11 GHz.
Technical data of N-Type connectors:
- impedance 50 ohm
- allowable power W (at a frequency of GHz) 2000 (0.1), 600 (1), 150 (10)
- VSWR value min 1.05, max. 1.3 for direct and 1.5 for angled connectors
- RF loss level dB 0.15 and 0.3 for angled connectors at a frequency of 2 to 3 GHz
- rated voltage peak - 1 kV, breakdown voltage - 2 kV
- minimum insulation resistance - 5000 megohms
- operating temperature range -65 ... +165 C
N-type connectors differ:
- N male and N female, straight and angled
- type of connector attachment - instrumental and cable
- the diameter of connected coaxial cable - from 3 mm to 10 mm and more;
- the installation of connected coaxial cable - screwed onto the cable, crimped with a clamping screw, soldered.
Adapters and spacers are also available. These adapters have an N-type female or male connector on one side and a mating connector for another type of connector on the other side.
N-type connectors are widely used in various RF and microwave equipment - filters, transceivers, measuring and matching equipment, radar equipment, telecommunications and communication systems, etc.
You can buy N-type connectors with worldwide delivery through our shipping services. Rangeful Store ships to retailers and wholesalers.
Orders for retail customers are processed through the online store. To purchase equipment for wholesalers, you must send an order to the email sales@rangeful.com.